Why does the transceiver toolkit not work correctly when using the 100G Interlaken Intel® FPGA IP on the Intel® Arria®10 devices? - Why does the transceiver toolkit not work correctly when using the 100G Interlaken Intel® FPGA IP on the Intel® Arria®10 devices? Description Due to a problem with the 100G Interlaken Intel® FPGA on the Intel® Arria®10 devices, unreliable Transceiver Toolkit operation will be observed when using the Intel® Quartus® Prime Edition software version 19.1 or earlier. For example the CDR unlock in serial loopback mode, and the test pattern might fail to change. Resolution This problem is fixed beginning with the Intel® Quartus® Prime Pro Edition software version 19.2 Custom Fields values: ['novalue'] Troubleshooting 1507226476 False ['Interlaken - 100G for 28nm and 20nm devices (PRIMARY) IP-ILKN/100G'] ['FPGA Dev Tools Quartus® Prime Software Pro', 'FPGA Dev Tools Quartus® Prime Software Standard'] 19.2 18.0 ['Arria® 10 GT FPGA', 'Arria® 10 GX FPGA', 'Arria® 10 SX FPGA'] ['novalue'] ['novalue'] ['novalue']