How do I address known software issues for Stratix V, Arria V and Cyclone V devices in the Quartus II software version 13.0 SP1? - How do I address known software issues for Stratix V, Arria V and Cyclone V devices in the Quartus II software version 13.0 SP1? Description There is a single patch available to address known software issues for Stratix® V, Arria® V, and Cyclone® V devices in the Quartus® II software version 13.0 SP1. This patch will be updated periodically with the latest software fixes. Check here periodically for updated files. Refer to the readme file for each device patch for the date the file was updated and information on the issues fixed in that patch. Resolution Download and install the Stratix V/Arria V/Cyclone V device patch 1.dp6 from the appropriate link below. You must install the Quartus II software version 13.0 SP1 before installing this patch. Note that you should not install any non-Stratix V/Arria V/Cyclone V patches on the Quartus II software version 13.0 SP1 after installing this patch. Patch 1.dp6 includes all fixes from the previously-released patch. You can install 1.dp6 over the previous device patch, but you do not need to install the previous device patch before installing patch 1.dp6. Download the version 13.0 SP1 (Subscription Edition) patch 1.dp6 for Windows (.exe) Download the version 13.0 SP1 (Subscription Edition) patch 1.dp6 for Linux (.tar) Download the Readme for the Quartus II software version 13.0 SP1 (Subscription Edition) patch 1.dp6 (.txt) To install a previously-released version of the Quartus II software version 13.0 SP1 Stratix V/Arria V/Cyclone V device patch, select the appropriate link below. Device patch 1.dp5 Download the version 13.0 SP1 (Subscription Edition) patch 1.dp5 for Windows (.exe) Download the version 13.0 SP1 (Subscription Edition) patch 1.dp5 for Linux (.tar) Download the Readme for the Quartus II software version 13.0 SP1 (Subscription Edition) patch 1.dp5 (.txt) Device patch 1.dp1 Download the version 13.0 SP1 (Subscription Edition) patch 1.dp1 for Windows (.exe) Download the version 13.0 SP1 (Subscription Edition) patch 1.dp1 for Linux (.run) Download the Readme for the Quartus II software version 13.0 SP1 (Subscription Edition) patch 1.dp1 (.txt) Related Articles Are there any updates to the 10GBASE-KR PHY IP core in Quartus II software version 13.0 SP1 dp1? Errata - Stratix V and Arria V timing model issues in the Quartus II software version 13.0 SP1 Why is my HPS DDR3 controller failing calibration? Why is the Cyclone V SoC Device SDRAM interface Vref pin voltage incorrect ? Why do I see random read errors using DDR2 SDRAM Controller with UniPHY/ DDR3 SDRAM Controller with UniPHY or LPDDR2 SDRAM Controller with UniPHY? Why do I see timing problems reported when using derive_pll_clocks using UniPHY-based memory controllers? Custom Fields values: ['novalue'] Troubleshooting 083119 False ['novalue'] ['FPGA Dev Tools Quartus II Software'] novalue 13.0 ['Arria® V FPGAs and SoCs', 'Arria® V GT FPGA', 'Arria® V GX FPGA', 'Arria® V GZ FPGA', 'Arria® V ST FPGA', 'Arria® V SX FPGA', 'Cyclone® V E FPGA', 'Cyclone® V FPGAs and SoCs', 'Cyclone® V GT FPGA', 'Cyclone® V GX FPGA', 'Cyclone® V SE FPGA', 'Cyclone® V ST FPGA', 'Cyclone® V SX FPGA', 'Stratix® V E FPGA', 'Stratix® V FPGAs', 'Stratix® V GS FPGA', 'Stratix® V GT FPGA', 'Stratix® V GX FPGA'] ['novalue'] ['novalue'] ['novalue']