Why does the Intel Agilex® 7 FPGA I-Series Development Kit schematic diagram shows a USB PHY device when there is no such device on the development kit board? - Why does the Intel Agilex® 7 FPGA I-Series Development Kit schematic diagram shows a USB PHY device when there is no such device on the development kit board? Description Referring to the Intel Agilex® 7 FPGA I-Series Development Kit schematic diagram, link : https://www.intel.com/content/dam/support/us/en/programmable/support-resources/bulk-container/support/boards-kits/agilex/agilex-agi027-devkit-schematic-reva1-apr2021.pdf on page 2, you will see that there is a USB PHY device connected to the Intel MAX 10 device in the block diagram. However, the USB PHY device is not available on the development kit. Resolution The USB PHY device has been replaced by Infineon (formerly Cypress) EZ-USB FX2 USB 2.0 Peripheral Controller. All USB PHY function and USB2.0 controller is implemented in the FX2 controller. The block diagram will be updated in a future release. Custom Fields values: ['novalue'] Troubleshooting 15012969518 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 23.3 22.3 ['Agilex™ 7 FPGAs and SoCs'] ['novalue'] ['novalue'] ['Agilex™ 7 FPGA I-Series Dev Kit']