On EPCQ-A devices, may the pins labeled “N.C” be connected to ground? - On EPCQ-A devices, may the pins labeled “N.C” be connected to ground? Description Yes. In the EPCQ-A Serial Configuration Device Datasheet (version 2019.10.01) section 1.4.2, a note states that "N.C pins must be left unconnected." This is incorrect. The pins labeled "N.C" are not internally connected, and may be either not connected on the board or connected to ground. Connecting these pins to other signals or voltages has not been characterized or verified, and so is not recommended. Resolution The note in the datasheet is scheduled to be corrected in a future document revision. Custom Fields values: ['novalue'] Troubleshooting 2209580374, 15010831511 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue 19.1 ['Arria® 10 FPGAs and SoCs', 'Cyclone® 10 GX FPGA', 'Stratix® 10 FPGAs and SoCs'] ['novalue'] ['Configuration Device EPCQ-A'] ['novalue']