Zynq UltraScale+* AMD* FPGA to Agilex™ 5 Conversion Guide - Same course in Japanese: Zynq UltraScale+* AMD* FPGA to Agilex™ 5 Conversion Guide (Japanese) 47 Minutes In this course, we go over hardware differences of the Zynq UltraScale+* AMD* FPGA with the Agilex™ 5 device. We will go over converting primitives and intellectual property (IP) including the memory interfaces on the FPGA fabric along with the memory interfaces for the embedded systems. We talk about the differences in the I/O as well as the clocking between the two devices. We spend time on the differences between the embedded portions of the FPGAs and go over the flows for building the embedded software. Course Objectives At Course Completion, you will be able to: Understand the differences between the Zynq UltraScale+ and Agilex™ 5 FPGAs Skills Required Familiarity with Quartus® Prime Pro software Prerequisites We recommend completing the following course: Using Quartus® Software If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the Notes or closed captioning (CC) feature of the player. If you need assistance with this course, please email fpgatraining@altera.com Reference Course Code: FPGA_OZ2AC. FPGA_OZ2AC. <p>Zynq UltraScale+* AMD* FPGA to Agilex 5 Conversion Guide</p>