Why can't I see my USB Blaster cables from ARM Development Studio 5 (DS-5) Eclipse? - Why can't I see my USB Blaster cables from ARM Development Studio 5 (DS-5) Eclipse? Description The following error may be generated when selecting browse in the Debug Configurations window in the ARM Development Studio™ 5 (DS-5™) Altera Edition Toolkit from the SoC Embedded Design Suite version 13.0. Failed to load client library from <path to Quartus II> /quartus/linux/libjtag_client.so. Please ensure that the environment variable QUARTUS_ROOTDIR is set to the path to the Altera Quartus® tools installation This problem is scheduled to be resolved in a future release of the SoC Embedded Design Suite. Resolution To workaround this problem in the SoC Embedded Design Suite version 13.0 follow the steps below: Open <Quartus II Installation>/ embedded/Embedded_Command_Shell.sh in a text editor Add the following line after line number 45: export LD_LIBRARY_PATH=/linux Launch eclipse from a Altera Embedded Command Shell: Quartus II Installation>/ embedded/Embedded_Command_Shell.sh Note : The ARM Development Studio™ 5 (DS-5™) Altera Edition Toolkit ( eclipse ) should always be launched from an Altera Embedded Command Shell. Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['FPGA Dev Tools Quartus II Software'] novalue 13.0 ['Arria® V ST FPGA', 'Arria® V SX FPGA', 'Cyclone® V SE FPGA', 'Cyclone® V ST FPGA', 'Cyclone® V SX FPGA'] ['novalue'] ['novalue'] ['novalue']