How do I generate post-synthesis netlist file (.vo or .vho) in the Quartus® Prime Standard Edition Software? - How do I generate post-synthesis netlist file (.vo or .vho) in the Quartus® Prime Standard Edition Software? Description Due to a problem in the Quartus® Prime Standard Edition Software, you might see that the tool automatically runs the Fitter stage when the EDA Netlist Writer is invoked after only completing the Analysis & Synthesis stage. As a result, the tool generates a post-fitting netlist file instead of a post-synthesis netlist file. Resolution To work around this problem, follow these steps using the Command Line Interface (CLI): 1) Run command: quartus_map <project name>.qpf (This will execute Analysis & Synthesis) 2) Run command: quartus_eda <project name>.qpf --snapshot=synthesized 3) Post-synthesis netlist .vo or .vho file is generated This problem does not occur with the Quartus® Prime Pro Edition Software. Custom Fields values: ['novalue'] Troubleshooting 15017595532 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Standard'] No plan to fix No plan to fix ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']