Error-[XMRE] Cross-module reference resolution error ./../..//../../ed_sim_tb/ed_sim_tb.sv, 286 - Error-[XMRE] Cross-module reference resolution error ./../..//../../ed_sim_tb/ed_sim_tb.sv, 286 Description You may see the error message below from Synopsys VCS* and VCS MX when using the Agilex™ 3 FPGA and Agilex™ 5 FPGA MIPI D-PHY Design Example, and Link 0 is set to RX mode and Link 1 is set to TX mode. Error-[XMRE] Cross-module reference resolution error ./../..//../../ed_sim_tb/ed_sim_tb.sv, 286 Error found while trying to resolve cross-module reference. token 'ppi_tg'. Originating module 'ed_sim_tb', first module hit 'ed_sim_tb'. Source info: while ((ed_sim_tb.ed_sim.dut.tg.tg.dphy_ppi_tg_inst.tg.tg_inst.PPI_RTL.ppi_agents[0].ppi_tg.ppi_gen.tst_cnt !== 'b1)) #(20000.000000000000) ; Resolution To work around this problem, please regenerate the MIPI D-PHY IP design example with Link 0 set to TX mode and Link 1 set to RX mode. Custom Fields values: ['novalue'] Troubleshooting 15018041134 False ['Interfaces'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue 25.1 ['Agilex™ 5 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']