Error (165011): altmemphy pin placement was unsuccessful - Error (165011): altmemphy pin placement was unsuccessful Description When you implement the DDR3 SDRAM Controller with UniPHY in a MAX® 10 device and add pin location assignments to the DQSn pins in the QSF file, you may get the following fitter error. Error (165011): altmemphy pin placement was unsuccessful Error (13130): The assigned location PIN <pin_number> for DQSn pin mem_dqs_n[*] is not a legal location As DQSn is a pseudo-differential pin of DQS, a pin location assignment for DQSn is not needed. The pin location assignment on the DQS pin is sufficient. Resolution To work around this error, remove the pin location assignment for the DQSn pins in the Assignment Editor or the QSF file. Custom Fields values: ['novalue'] Troubleshooting NA False ['DDR3 SDRAM Controller with ALTMEMPHY IP'] ['FPGA Dev Tools Quartus II Software'] novalue 14.1 ['MAX® 10 10 FPGAs'] ['novalue'] ['novalue'] ['novalue']