Why are my configuration pins not shown correctly in the .pin file for a design targeting a Stratix IV GT device? - Why are my configuration pins not shown correctly in the .pin file for a design targeting a Stratix IV GT device? Description Due to a problem in the Quartus® II software versions 10.1 and later, the pin-out file ( .pin ) generated for a Stratix® IV GT device incorrectly shows the CONF_DONE and nSTATUS pins as GND*. This problem is fixed beginning with the Quartus II software version 11.0. Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['novalue'] novalue novalue ['Stratix® IV GT FPGA'] ['novalue'] ['novalue'] ['novalue']