Why does the link take long to come up for GTS Ethernet Hard IP with auto-negotiation and link training (AN/LT) multirate designs? - Why does the link take long to come up for GTS Ethernet Hard IP with auto-negotiation and link training (AN/LT) multirate designs? Description Due to a problem in the Quartus® Prime Pro Edition software version 25.3, you may see link down problem for GTS Ethernet Hard IP with auto-negotiation and link training (AN/LT) multirate designs. This problem happens when interop of 25G KR-FEC MRIP (MultiRate IP) design with 25G no-FEC SRIP (SingleRate IP) design variant. Resolution To work around this problem in the Quartus® Prime Pro Edition software version 25.3, set ‘enable_consortium_next_page_send’ to 0 in the ANLT CSR register to disable the cons next page. Address Bit SW Access Name Description 0x300 8 RW enable_consortium_next_page_send Send the Consortium standard next pages immediately after the base page. If User next pages are enabled, consortium pages will be sent after the last user's next page. This problem is scheduled to be fixed in the future release of the Quartus Prime Pro Edition software. Custom Fields values: ['novalue'] Troubleshooting 16028469224 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue 25.3 ['Agilex™ 5 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']