Using the Altera® Quartus® Prime Standard Edition Software: An Introduction - Same Course in Simplified Chinese: 使用Quartus Prime 软件工具: 简介 80 Minutes In this introductory training, you will become familiar with the basics of the easy-to-use Altera® Quartus® Prime Standard Edition software design environment. You will learn about the steps involved in the basic FPGA design flow and how to use the software in the flow, going from design entry to device programming all within one tool. Project creation and management, design and I/O assignments, and simulation are also covered. Course Objectives At course completion, you will be able to: Learn the basics of using the Altera® Quartus® Prime Standard Edition software Create and manage Altera® Quartus Prime software projects Use the IP Catalog and IP Parameter Editor to easily create, configure, and instantiate IP cores Control design processing and hardware options using settings and assignments Create I/O assignments using the Pin Planner Perform a design simulation in a 3rd-party simulation tool Program an Altera® FPGA or CPLD with the Altera® Quartus Prime Programmer Skills Required Background in digital logic design If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the Notes or closed captioning (CC) feature of the player. If you need assistance with this course, please email fpgatraining@altera.com . Reference Course Code: FPGA_ODSW1100. FPGA_ODSW1100. <p>Using the Altera Quartus Prime Standard Edition Software: An Introduction</p>