Is reconfiguration of the VCO post-scale divider supported in the Quartus® II software? - Is reconfiguration of the VCO post-scale divider supported in the Quartus® II software? Description Reconfiguration of the VCO post-scale divider is only supported in the Quartus® II software versions 13.0 and later via the PLL_RECONFIG Intel® FPGA IP. Resolution The address offset for the register that controls this setting is 011100. Writing a '0' sets a VCO divide value of 1. Writing a '1' sets a VCO divide value of 2. Custom Fields values: ['novalue'] Troubleshooting 1408175663 False ['PLL'] ['novalue'] novalue novalue ['Arria® V GT FPGA', 'Arria® V GX FPGA', 'Arria® V GZ FPGA', 'Arria® V ST FPGA', 'Arria® V SX FPGA', 'Cyclone® V E FPGA', 'Cyclone® V GT FPGA', 'Cyclone® V GX FPGA', 'Cyclone® V SE FPGA', 'Cyclone® V ST FPGA', 'Cyclone® V SX FPGA', 'Stratix® V E FPGA', 'Stratix® V GS FPGA', 'Stratix® V GT FPGA', 'Stratix® V GX FPGA'] ['novalue'] ['novalue'] ['novalue']