Virtual UFM included in HW summary and bsp but pof file does not reflect increased space. - Virtual UFM included in HW summary and bsp but pof file does not reflect increased space. v18.1 tools, Nios II/e device: 10M16DCU324 uncomressed single image. Qsys configured for CFM2 as virtual-UFM (read-write) and memory map includes increased space. Code (.text) not carrying across into the new increased space. Map file from pof conversion still shows only UFM0+UFM1. How do I get CFM2 to show up as part of the full UFM space? Replies: Re: Virtual UFM included in HW summary and bsp but pof file does not reflect increased space. The issue has been identified. It was an incorrect device on the development HW: a 10M16DCU324 was installed while a 10M16DAU324 or 10M16DFU324 should have been installed. The 'DC' does not support virtual-UFM in the CFM sectors. Doh! Replies: Re: Virtual UFM included in HW summary and bsp but pof file does not reflect increased space. Hi, Please check the following pages that will help you to understand the requirements and steps available: .pof and ICB Settings : https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/ug_m10_config.pdf#page=37 https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/ug_m10_config.pdf#page=7 Regards,