DisplayPort IP Design Example User Guide Agilex™ 5 FPGAs - Describes the DisplayPort IP design example for Agilex 5 E-Series devices. - 2025-08-15

Version: 25.1

1. DisplayPort IP Design Example Quick Start Guide
1.1. Directory Structure
1.2. Hardware and Software Requirements
1.3. Generating the Design
1.4. Simulating the Design
1.5. Compiling and Testing the Design
1.5.1. Compiling and Testing the Design Using Agilex™ 5 E-Series 065B Premium Development Kit
1.5.2. Compiling and Testing the Design Using Agilex™ 5 E-Series 065B Modular Development Kit Connector with No FMC Mode
1.5.3. Compiling and Testing the Design Using Agilex™ 5 E-Series 065B Modular Development Kit Connecter with Bitec Rev 8 Daughter Card
1.6. Regenerating the Nios V .elf File
1.7. DisplayPort IP Design Example Parameters
2. DisplayPort IP Design Examples
2.1. Design Components
2.2. DisplayPort IP Design Example Clock Domains
2.3. Interface Signals and Parameters
2.4. Simulation Testbench
2.5. DisplayPort Duplex or Dual Simplex Design Examples
2.5.1. DisplayPort Duplex Designs
2.5.2. DisplayPort Dual-Simplex Designs
3. DisplayPort SST Parallel Loopback without PCR Design Example
3.1. Features
3.2. Functional Description
4. DisplayPort SST Parallel Loopback with AXI4-S Video Interface Design Example
4.1. Features
4.2. Functional Description
5. DisplayPort SST TX-Only Design Example
5.1. DisplayPort SST TX-Only Features
5.2. DisplayPort SST TX-Only Functional Description
6. DisplayPort SST RX-Only Design Example
6.1. DisplayPort SST RX-Only Features
6.2. DisplayPort SST RX-Only Functional Description
7. Document Revision History for the DisplayPort IP Design Example User Guide: Agilex™ 5 FPGAs

Back to home page