4.4.5. Viewing the Results - At the end of the demonstration, you will be able to view the results on the HDCP-enabled DisplayPort external sink. - 2025-12-16

F-Tile DisplayPort IP Design Example User Guide
Version
25.3
At the end of the demonstration, you will be able to view the results on the HDCP-enabled DisplayPort external sink.

To view the results of the demonstration, follow these steps:

  1. Power up the Altera® FPGA board.
  2. Change the directory to <project directory>/quartus/ directory.
  3. Type the following command on the Nios® V Command Shell to download the Software Object File (.sof) to the FPGA.
    quartus_pgm -m jtag -o p;<Quartus Prime project name>.sof.
  4. Power up the HDCP-enabled DisplayPort external source and sink (if you have not done so). The DisplayPort external sink displays the output of your DisplayPort external source.