Intel Arria 10 SoC UEFI Boot Loader User Guide - 2017-12-15

1. Intel Arria 10 SoC UEFI Boot Loader User Guide
1.1. Acronyms and Definitions
1.2. Recommended System Requirements
1.2.1. Minimum Hardware Requirements
1.2.2. Minimum Software Requirements
1.3. Installation Folders
1.4. Boot Flow Overview
1.5. Getting Started
1.5.1. Compiling the Hardware Design
1.5.1.1. Open a Intel Quartus Prime Project
1.5.1.2. Generate the System in Platform Designer
1.5.1.3. Compile the Design in Intel Quartus Prime
1.5.1.4. Converting the Programming File
1.5.1.4.1. Converting the SOF File into Two Split RBF Files
1.5.1.4.2. Converting the SOF File into a Single RBF File
1.5.1.4.3. Single RBF Conversion Using the GUI Converter
1.5.1.4.4. Single RBF Conversion Using the Intel Quartus Prime Pro Edition Programmer Command Line Tools
1.5.2. Generating the Boot Loader and Device Tree for UEFI Boot Loader
1.5.2.1. Generating the Boot Loader DTS File for 16.0 Release and Below
1.5.2.1.1. Windows Environment
1.5.2.1.2. Linux Environment
1.5.2.2. Generating a Boot Loader DTB File for the 16.0 Release and Below
1.5.2.3. Generating the Boot Loader DTS File for the 16.1 Release
1.5.2.3.1. Windows Environment
1.5.2.3.2. Linux Environment
1.5.2.4. Generating a Boot Loader DTB File for the 16.1 Release
1.5.3. Building the UEFI Boot Loader
1.5.3.1. Prerequisites
1.5.3.2. Supported Compiler Toolchain
1.5.3.3. Obtaining the UEFI Source Code
1.5.3.4. Preparing the Handoff DTB
1.5.3.4.1. Updating the Device Tree Blob
1.5.3.5. Compiling the UEFI
1.5.3.5.1. Compiling the UEFI in a Windows Environment
1.5.3.5.2. Compiling the UEFI in the Linux Environment
1.5.3.5.3. Compiling the UEFI with the ARMCC Compiler
1.5.3.6. Generated Files from UEFI Compile
1.5.4. Creating an SD Card Image
1.5.4.1. Creating an SD Card Image on Linux
1.5.4.2. Creating an SD Card Image on Windows
1.5.4.3. Compile the Bare Metal Application Source Code
1.5.4.4. Updating Individual Elements on the SD Card
1.5.4.4.1. Programming the Bare Metal Image
1.5.4.4.2. Programming the Integrity Real-Time Operating System Image
1.5.4.4.3. Programming the VxWorks Real-Time Operating System Image
1.5.5. Creating a QSPI Image
1.5.5.1. Updating the Golden Hardware Reference Design to Boot from QSPI
1.5.5.2. Compiling the Hardware and Software for QSPI
1.5.5.3. Compiling the UEFI Source Code with the Updated QSPI Device Tree Blob
1.5.5.4. QSPI Layout
1.5.5.5. Updating Individual Elements into the QSPI
1.5.5.5.1. Programming the Bare Metal Image
1.5.5.5.2. Programming the Integrity Real-Time Operating System Image
1.5.5.5.3. Programming the VxWorks Real-Time Operating System Image
1.5.6. Booting the Board with SD/MMC
1.5.6.1. Configuring the Board
1.5.6.2. Configuring the Serial Connection
1.5.6.3. Booting a Bare Metal Application from SD/MMC
1.5.6.4. Booting Integrity Real-Time Operating System from SD/MMC
1.5.6.5. Booting from VxWorks Real-Time Operating System from SD/MMC
1.5.7. Booting the Board with QSPI
1.5.7.1. Configuring the Board
1.5.7.2. Configuring the Serial Connection
1.5.7.3. Booting a Bare Metal Application from QSPI
1.5.7.4. Booting Integrity Real-Time Operating System from QSPI
1.5.7.5. Booting from VxWorks Real-Time Operating System from QSPI
1.5.8. Early I/O Release
1.5.8.1. Boot Flow
1.5.8.2. Enabling Early I/O Release
1.5.8.2.1. Automatically Loaded Peripheral RBF and Core RBF
1.5.8.2.2. Automatically Loaded Peripheral RBF And Manually Loaded RBF Through Pit Stop
1.5.8.2.3. Automatically Loaded Combined RBF
1.5.8.3. Device Tree Support
1.5.8.4. Early I/O Release Output Messages
1.5.9. Booting Linux Using the UEFI Boot Loader
1.5.9.1. Boot Linux Support
1.5.9.2. Prerequisites
1.5.9.3. Booting Linux from the PEI Phase
1.5.9.3.1. Booting Linux from the PEI Phase Automatically
1.5.9.3.2. Booting Linux from the PEI Phase Using SD/MMC or QSPI Manually
1.5.9.4. Booting Linux from the DXE Phase
1.5.9.4.1. Booting Linux from the DXE Phase Using SD/MMC
1.5.9.4.2. Booting Linux from the DXE Phase Using SD/MMC Manually
1.5.9.4.3. Booting Linux from the DXE Phase Using SD/MMC Automatically
1.5.10. Debugging an Example Project
1.5.10.1. Configuring and Starting the Debugger in Eclipse
1.5.10.2. Setting a Breakpoint
1.5.10.3. Watching Variable Contents
1.5.11. UEFI Boot Loader Customization
1.5.11.1. Changing the Platform Name
1.5.11.2. Turning Off the Debug Features for Production Release
1.5.11.3. Modifying the UART Port Number for Serial Terminal Messages
1.5.11.4. Adding Custom Board Initialization Code
1.5.12. Enabling Checksum for the FPGA Image
1.5.12.1. Configuration in UEFI
1.5.12.2. Generate mkimage
1.5.13. NAND Bad Block Management
1.5.13.1. Bad Block Marker
1.5.13.2. Bad Block Handling
1.6. Enabling the UEFI DXE Phase and the UEFI Shell
1.7. Using the Network Feature Under the UEFI Shell
1.7.1. Obtain the IP Address from the DHCP Server
1.7.2. Use a Static IP Address
1.7.3. Ping Test
1.7.4. TFTP Test
1.8. Creating your First UEFI Application
1.9. Using Arm DS-5 Intel SoC FPGA Edition (For Windows Only)
1.9.1. Importing the DS-5 Project
1.9.2. Building UEFI in Arm DS-5 Intel SoC FPGA Edition
1.9.3. Importing the Arm DS-5 Intel SoC FPGA Edition Debug Script
1.10. Pit Stop Utility Guide
1.10.1. Enabling or Disabling the Pit Stop Utility
1.10.2. Pit Stop Utility Commands and Use
1.10.2.1. Memory and Memory-Mapped I/O Commands
1.10.2.2. QSPI Flash Commands
1.10.2.3. NAND Flash Commands
1.10.2.4. SD/MMC Commands
1.10.2.5. FAT32 File System Commands
1.10.2.6. Others
1.10.2.7. Help
1.11. Porting HWLIBs to UEFI Guidelines
1.11.1. Coding Standard
1.11.1.1. General Rules
1.11.1.2. Naming Conventions
1.11.1.3. Type and Macro Names
1.11.1.4. Variables
1.11.1.5. Function
1.11.1.6. Comment
1.11.2. Data Types Conversion
1.11.3. Status Code Conversion
1.11.4. Header Conversion
1.11.5. Basic I/O Functions Conversion
1.12. Tera Term Installation
1.12.1. Making a Serial Connection
1.13. Minicom Installation
1.13.1. Making a Serial Connection
1.14. Win32DiskImager Tool Installation
1.14.1. Using Win32Disk Imager
1.15. TFTPd64 By Ph.Jounin Installation
1.15.1. Checking Your Machine or Laptop IPv4 Address
1.15.2. Enabling the TFTP Server through the Windows Firewall
1.15.3. Using the TFTP Server in Windows
1.16. Revision History of Intel Arria 10 SoC UEFI Boot Loader User Guide

Back to home page