MAX 10 FPGA Development Kit User Guide - The MAX 10 FPGA Development Kit provides a hardware platform for evaluating the performance and features of the MAX 10 device. - 2025-12-04

1. Overview
1.1. Block Diagram
1.2. Feature Summary
1.3. Box Contents
2. Getting Started
2.1. Before You Begin
2.2. Handling the Board
2.2.1. Handling the DIP Switches
2.3. Software and Driver Installation
2.3.1. Installing the Quartus Prime Standard Edition Software
2.3.2. Installing the Development Kit
2.3.3. Installing the Intel FPGA Download Cable Driver
2.4. Board Update Portal
2.4.1. Step 1: Connect to the Board Update Portal
2.4.2. Step 2: Update the User Software Portion
3. Board Test System
3.1. Using the Configure Menu
3.2. The System Info Tab
3.3. The GPIO Tab
3.4. The Flash Tab
3.5. The HSMC Tab
3.6. The DDR3 Tab
3.7. The ADC Tab
3.8. The HDMI Tab
3.9. The Sleep Mode Tab
3.10. The Power Monitor
3.11. The Clock Controller
4. Document Revision History for the MAX 10 FPGA Development Kit User Guide
A. Development Kit Components
A.1. Board Overview
A.2. Featured Device
A.3. Configuration
A.3.1. Using the Quartus Prime Programmer
A.3.2. Selecting the Internal Configuration Scheme
A.3.3. Switch and Jumper Settings
A.4. Status Elements
A.5. Setup Elements
A.6. General User Input/Output
A.7. Clock Circuitry
A.7.1. Onboard Oscillators
A.7.2. Offboard Clock Input/Output
A.8. Components and Interfaces
A.8.1. 10/100/1000 Ethernet PHY
A.8.2. Digital-to-Analog Converter
A.8.3. HDMI Video Output
A.8.4. HSMC
A.8.5. Pmod Connectors
A.8.6. USB to UART
A.9. Memory
A.9.1. DDR3 Rev. B Board
A.9.2. DDR3 Rev. C Board
A.9.3. Flash
A.10. Power Distribution System
B. Developer Resources
C. Safety and Regulatory Compliance Information
C.1. Safety and Regulatory Information
C.1.1. Safety Warnings
C.1.2. Safety Cautions
C.2. Compliance Information

Back to home page