2.3. Definitions of Power Terms Used in this Document - The total power consumption of an Agilex or Stratix 10 device consists of the following components: - 2026-02-20

Power and Thermal Calculator User Guide
Version
25.1
Product Type
Device Families > Agilex Families > Agilex 5
Device Families > Agilex Families > Agilex 5 > E-Series
Device Families > Agilex Families
Device Families > Agilex Families > Agilex 7
Device Families > Agilex Families > Agilex 3
Device Families > Stratix Families
Device Families > Agilex Families > Agilex 7 > I-Series
Device Families > Agilex Families > Agilex 5 > D-Series
Device Families > Agilex Families > Agilex 7 > M-Series
Development Software and Tools > FPGA Design & Simulation Tools > Quartus Prime Design Software > Pro Edition
Device Families > Agilex Families > Agilex 7 > F-Series
Device Families > Stratix Families > Stratix 10
Development Software and Tools > FPGA Design & Simulation Tools > Quartus Prime Design Software
Device Families > Agilex Families > Agilex 3 > C-Series
Resource Type
Documentation > User Guides
ft:sourceName
DITA
The total power consumption of an Agilex™ or Stratix® 10 device consists of the following components:
  • Static power—the power that the configured device consumes when powered up but no user clocks are operating. Static power is dependent on device size, device grade, power characteristics, and junction temperature. Static power excludes DC bias power of analog blocks, such as I/O and transceiver analog circuitry.
  • Dynamic power—the additional power consumption of the device due to signal activity or toggling.
  • Standby power
    • For Stratix® 10 devices only—Additional power, independent of signal activity or toggling, that is consumed only when specific circuitry is enabled through configuration RAM settings. Standby power includes, but is not limited to, I/O and transceiver DC bias power.
    • For Agilex™ FPGA portfolio devices—This power is included as part of the reported dynamic power.