3.5.3. Timing Parameters - 2025-12-16

MAX 10 Power Management User Guide
Version
18.0

The following table lists the definition and minimum value of the T1, T2, T3, and T4 parameters in the entering sleep mode timing diagram and exiting sleep mode timing diagram, respectively.

Table 7.  T1, T2, T3, and T4 Parameters Minimum Value and Definition
Parameter Width (bits) Minimum Value (Clock Cycle) Description
T1 6 1 ioe disable timing.
T2 6 11 clk_ena disable timing.
T3 6 1 clk_ena enable timing.
T4 6 40 ioe enable timing.

T1, T2, T3, and T4 can be increased based on your system requirement.