AN 370: Using the FPGA Serial Flash Loader with the Intel Quartus Prime Software - AN 370: Using the FPGA Serial Flash Loader IP Core with the Intel Quartus Prime Software - 2019-02-18

1. Using the Intel FPGA Serial Flash Loader IP Core with the Intel Quartus Prime Software
1.1. Features
1.2. Overview
1.3. Programming Single and Multiple Serial Configuration Devices with the Intel FPGA Serial Flash Loader IP Core
1.4. Using the Intel FPGA Serial Flash Loader IP Core in the Intel Quartus Prime Software
1.4.1. Instantiating the Intel FPGA Serial Flash Loader IP Core
1.5. Generating .jic and .jam Programming Files in the Intel Quartus Prime Software
1.5.1. Converting .sof to .jic Files in the Intel Quartus Prime Software
1.5.2. Converting .jic Files to .jam Files in the Intel Quartus Prime Software
1.6. Programming Serial Configuration Devices with the Intel Quartus Prime Programmer
1.6.1. Programming Serial Configuration Devices Using the Intel Quartus Prime Programmer and .jic Files
1.6.2. Programming Serial Configuration Devices Using the Intel Quartus Prime Programmer and .jam Files
1.7. Features for Intel Arria 10 and Intel Cyclone 10 GX Devices
1.7.1. Multiple Configuration Devices Support
1.7.2. Boot Page Selection
1.8. Intel FPGA Serial Flash Loader IP Core Parameter
1.9. Intel FPGA Serial Flash Loader IP Core Signals
1.10. Document Revision History for AN 370: Using the Intel FPGA Serial Flash Loader IP Core with the Intel Quartus Prime Software

Back to home page