For instructions on how to install the DMA test driver and run the Linux DMA application, refer to sections 2.6 and 2.7 in the User Guide for the Avalon® -MM Intel® Stratix® 10 Hard IP+ for PCI Express® (Avalon-MM Intel Stratix 10 Hard IP+ for PCI Express Solutions User Guide).
Note: After downloading the reference design from
the Design Store,
restore the project by following the instructions on the Intel FPGA Design Store download page
and
using
Intel®
Quartus® Prime
19.2.
You
will find a few folders generated in your project directory. You will also have a software_hbm2_ddr4.tar.gz
folder with the software driver and tool. Make sure to unzip this folder in
Linux.
You may run into driver installation issues if you unzip this folder in
Windows.
Figure 2. Link Test GUI
Figure 3. Link Test Pass Result
Figure 4. DMA GUI
