The Configuration Device tab
allows you to specify the properties of an existing or new flash memory device that you
want to program. Click Add Device to select a programming
template for a predefined flash memory, or to click <<new device>> and then define a new flash memory
device.
The following settings are available:
| Option | Description |
|---|---|
| Device name | Specify a unique name for the flash not already listed in the Name column. The Name must not contain any empty string (space) or special characters (except "_"). |
| Device ID | Specify the 3-byte ID that the Programmer Auto-Detect operation uses to detect the flash programming device, such as 0x20 0xBB 0x21. |
| Device I/O voltage | Specify 1.8V or 3.0/3.3V to match your memory device specification. |
| Device density | Select the total density that corresponds with your flash memory device size. |
| Total device die | Specify the total number of die for a stacked device (where applicable). |
| Single I/O mode dummy clock | Specify the Fast Read dummy clock cycle for flash device in single I/O protocol. The programming file generation uses this setting to determine if the configuration requires bit shifting to compensate for the actual dummy clock cycle during Active Serial configuration. |
| Quad I/O mode dummy clock | Specify the Fast Read dummy clock cycle for flash device in Quad I/O protocol. The programming file generation uses this setting to determine if the configuration requires bit shifting to compensate for the actual dummy clock cycle during Active Serial configuration. |
| Custom database directory | Specifies the location of the .xml file that preserves a flash memory
device definition. Note: When you specify a non-default folder for the
Custom database
directory location, place the .sof and .jic files in the same folder as the .xml file to avoid missing a defined
flash database or corruption of the .jic file.
|